lecture:lecture_20
Lecture 20: Pump Testing, Final Review
The pump report is due by 6pm today (3/10)
Learning Objectives
- Be able to finish assembly of the pump
- Be able to perform basic trouble-shooting to verify operation of the pump
- Be able to describe the shape of head versus flow rate curve for a pump
- Be able to describe the shape of the efficiency versus flow rate curve for a pump
- Be able to identify the no-flow and maximum flow points on head versus flow rate and efficiency versus flow rate curves
- Be able to perform the measurements necessary to measure pump performance: measure flow rate, head, power input
- Be able to reduce the raw data from pump performance measurements to obtain head versus flow rate and efficiency versus flow rate curves.
- Be able to complete the measurements necessary to measure pump performance: measure flow rate, head, power input
- Be able to make a polynomial curve fit to the head versus flow rate and efficiency versus flow rate curves
Lecture Slides and Notes
Supplement notes and videos
- Short video on modern manufacturing techniques used to make a phone dock in Portland Oregon
lecture/lecture_20.txt · Last modified: 2016/02/29 11:10 by robert
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
