mini_test_clip_adapters
This is an old revision of the document!
Mini test clip adapters
- Purpose: Adding these clips to the probles on the multimeter leads makes troubleshooting your circuits much easier.
- Source: Radio Shack store. CAUTION: Radio Shack's mini hook clips look almost identical to the mini test clip adapters - you DO NOT need the mini hook clips. Be sure to get part number 270-334.
- Approximate Cost: $3.50 per pair
mini_test_clip_adapters.1411583699.txt.gz · Last modified: 2014/09/24 11:34 by nathalie
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
