User Tools

Site Tools


mini_test_clip_adapters

This is an old revision of the document!


Mini test clip adapters

  • Purpose: Adding these clips to the probles on the multimeter leads makes troubleshooting your circuits much easier. It allows hands-free testing because the clips stay attached to the leads.
  • Source: Radio Shack store. CAUTION: Radio Shack's mini hook clips look almost identical to the mini test clip adapters - you DO NOT need the mini hook clips. Be sure to get part number 270-334.
  • Approximate Cost: $3.50 per pair

Alternatives

The clip adapters can be hard to find. A good alternative is to have a set of mini-grabber probes that plug directly into your DMM

* Banana-Minigrabber at Amazon for$7

back

mini_test_clip_adapters.1506388767.txt.gz · Last modified: 2017/09/25 18:19 by gerry