mini_test_clip_adapters
This is an old revision of the document!
Mini test clip adapters
- Purpose: Adding these clips to the probles on the multimeter leads makes troubleshooting your circuits much easier. It allows hands-free testing because the clips stay attached to the leads.
- Source: Radio Shack store. CAUTION: Radio Shack's mini hook clips look almost identical to the mini test clip adapters - you DO NOT need the mini hook clips. Be sure to get part number 270-334.
- Approximate Cost: $3.50 per pair
Alternatives
The clip adapters can be hard to find. A good alternative is to have a set of mini-grabber probes that plug directly into your DMM
* Banana-Minigrabber pair at Amazon for $7
Another alternative is a alligator clips with pig tails from Sparkfun for $7.
mini_test_clip_adapters.1512764400.txt.gz · Last modified: 2017/12/08 12:20 by gerry
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
