User Tools

Site Tools


wire_stripper

Fine Gage Wire stripper

Image from pololu.com

  • Purpose: Essential tool for removing insulation from electrical wiring.
  • Source: Local hardware or general supply stores, as well as on-line. At www.omnitronelectronics.net, the part number is ST-30.
  • Make sure the stripper can handle fine wires. A common range for fine wire strippers is 22-30 AWG. Wire strippers for home electrical or automotive use are not helpful. The image at the bottom of the page shows the detail of the cutter end of a fine-gage stripper with the wire gages indicated on the left side
  • Approximate Cost: $5 to $15.

Examples available from vendors in Fall 2019

Also check the Electronics Prototype lab (EPL) and the vending machines, both in the basement of the Fourth Avenue Building

Image from pololu.com

back

wire_stripper.txt · Last modified: 2019/09/07 14:05 by gerry