wire_stripper
Fine Gage Wire stripper
Image from pololu.com
- Purpose: Essential tool for removing insulation from electrical wiring.
- Source: Local hardware or general supply stores, as well as on-line. At www.omnitronelectronics.net, the part number is ST-30.
- Make sure the stripper can handle fine wires. A common range for fine wire strippers is 22-30 AWG. Wire strippers for home electrical or automotive use are not helpful. The image at the bottom of the page shows the detail of the cutter end of a fine-gage stripper with the wire gages indicated on the left side
- Approximate Cost: $5 to $15.
Examples available from vendors in Fall 2019
Also check the Electronics Prototype lab (EPL) and the vending machines, both in the basement of the Fourth Avenue Building
Image from pololu.com
wire_stripper.txt · Last modified: 2019/09/07 14:05 by gerry
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
